No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-634-0660
NSN 5910-01-412-1070
NSN 5975-00-070-9553
NSN 5910-00-655-3036
NSN 5915-01-350-3696
NSN 6130-01-016-9598
NSN 5930-01-430-9263
NSN 5925-00-517-0271
NSN 5925-01-428-9978
NSN 5998-01-190-7793
NSN 6130-00-728-5538
NSN 5835-00-233-6327