Waterproof gland type for cable hole
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 6105-00-682-3140
NSN 6145-01-258-9201
NSN 5965-00-079-2360
NSN 5985-01-366-0785
NSN 6320-01-191-6717
NSN 6620-01-254-3609
NSN 5920-00-329-8475
NSN 5960-00-324-7291
NSN 5935-00-730-4593
NSN 5960-00-466-2258
NSN 5950-00-920-4799
NSN 5990-00-132-0187