No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-00-932-0726
NSN 5985-01-154-7444
NSN 5910-00-505-3015
NSN 5998-01-182-2399
NSN 6220-01-468-6030
NSN 5990-01-188-7309
NSN 6645-01-483-1518
NSN 5960-01-599-9821
NSN 2925-01-194-9737
NSN 5999-01-421-3388
NSN 5935-01-594-6992
NSN 5835-01-629-2044