No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6135-01-084-1609
NSN 5999-00-210-3890
NSN 5930-00-889-2852
NSN 7035-00-421-8710
NSN 6135-01-423-7502
NSN 5895-00-239-5227
NSN 6135-01-537-7639
NSN 6220-01-004-8909
NSN 6610-01-165-3750
NSN 6130-00-511-9441
NSN 5930-01-396-9716
NSN 2925-01-236-0015