0.120 in thk; item has three open slots; two slots are 0.140.In wide and 0.590 in lg, located near the right and left top side; third slot in 0.44 in wide and 0.62 in lg, located at top center
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 5965-00-768-4366
NSN 5945-01-652-5596
NSN 6110-00-066-9614
NSN 5950-00-847-7958
NSN 5855-00-791-5000
NSN 5999-01-186-7581
NSN 5930-01-213-6519
NSN 6645-01-394-5149
NSN 6610-01-291-4173
NSN 5960-01-458-7999
NSN 5910-01-526-2113
NSN 5895-01-356-3990