No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 5990-01-537-1553
NSN 7035-01-074-7634
NSN 5930-01-459-6074
NSN 5950-00-542-1228
NSN 5910-01-286-2141
NSN 6645-00-720-3953
NSN 6145-00-859-2522
NSN 5930-01-454-8920
NSN 5975-01-192-0491
NSN 5965-00-877-9197
NSN 7035-00-064-7008
NSN 6145-00-970-1549