No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other fabricated asbestos fibers; mixtures based on asbstos or on asbestos and magnesium carbonate
NSN 6610-01-212-8854
NSN 6320-00-456-2092
NSN 6685-00-958-9014
NSN 5996-00-320-2798
NSN 2925-01-489-1394
NSN 6685-00-108-6374
NSN 5975-00-422-1301
NSN 6130-01-422-4709
NSN 5895-01-474-8611
NSN 5996-01-214-6575
NSN 5975-00-985-6630
NSN 6645-00-462-7072