Heavy
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5999-01-378-6416
NSN 5975-00-677-7036
NSN 5945-01-338-2502
NSN 5910-00-327-8609
NSN 5996-01-625-9825
NSN 6135-00-865-4653
NSN 5975-01-351-6846
NSN 5999-00-054-6362
NSN 5920-01-121-0740
NSN 5998-01-398-9909
NSN 6240-01-034-9457
NSN 6150-01-443-3139