A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6220-01-539-5970
NSN 5835-01-652-4959
NSN 5920-01-390-1646
NSN 5895-00-356-2923
NSN 5965-01-360-0454
NSN 5930-01-094-5928
NSN 5910-01-406-3505
NSN 6110-01-338-6746
NSN 5915-01-654-0965
NSN 6105-00-228-1160
NSN 5975-01-344-4950
NSN 7035-01-330-6768