No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5999-01-333-2546
NSN 6145-01-036-8439
NSN 5960-00-056-7747
NSN 6135-00-235-1938
NSN 5985-01-102-5444
NSN 6240-01-432-5773
NSN 2925-00-035-5633
NSN 5905-00-506-2008
NSN 6145-01-104-5084
NSN 5975-01-413-2474
NSN 6150-01-368-8987
NSN 5835-00-155-1379