01-522-7364, rough terrain container handler
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6650-01-422-3395
NSN 5945-00-533-7229
NSN 7035-00-117-0418
NSN 5985-01-461-8575
NSN 6145-00-444-1424
NSN 5975-00-456-2257
NSN 6650-01-289-0524
NSN 5930-00-593-1569
NSN 5965-01-179-7749
NSN 6135-01-371-9209
NSN 6130-01-395-2943
NSN 5920-00-812-5287