Six grooves on each side
No other part numbers with same form, fit, and function found.
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 5835-01-215-5961
NSN 2925-01-250-2731
NSN 2925-01-355-5280
NSN 5910-01-534-3722
NSN 5950-01-413-4089
NSN 6645-01-225-8106
NSN 2925-01-277-0873
NSN 5930-00-372-5642
NSN 5935-00-356-1664
NSN 7035-00-753-0695
NSN 5996-00-518-3675
NSN 5835-00-876-4544