No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-119-9104
NSN 5920-01-150-6870
NSN 5920-01-648-8343
NSN 5950-01-244-4631
NSN 5996-01-368-5454
NSN 6240-01-187-1765
NSN 2925-01-221-3247
NSN 6620-00-010-8190
NSN 7035-01-439-9356
NSN 2925-00-459-4519
NSN 5895-00-596-8678
NSN 5999-01-484-9059