Color iridescent yellow
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 5999-01-580-1147
NSN 5960-01-092-1234
NSN 5930-01-412-6358
NSN 5835-01-644-8013
NSN 5975-00-269-4365
NSN 2925-01-328-4394
NSN 5996-00-285-3727
NSN 6650-01-065-2796
NSN 6320-00-284-1524
NSN 5905-01-607-6903
NSN 6650-00-107-8509
NSN 6150-01-353-6823