No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6685-00-114-1826
NSN 6220-00-295-3594
NSN 6645-01-177-6021
NSN 6150-01-264-3838
NSN 5915-00-518-4656
NSN 6145-00-161-2394
NSN 5855-01-558-9357
NSN 5915-00-125-2504
NSN 6150-00-021-8051
NSN 5905-01-622-7674
NSN 6145-01-370-1242
NSN 5999-00-373-3158