A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5905-00-817-7433
NSN 4140-01-488-5980
NSN 6685-01-423-8076
NSN 5930-00-224-3798
NSN 6610-01-308-6148
NSN 5930-01-150-5996
NSN 5935-01-229-7316
NSN 5975-00-335-2588
NSN 5905-00-525-4653
NSN 6105-01-310-2626
NSN 5920-00-345-5833
NSN 6320-00-036-3688