No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-00-861-7913
NSN 6135-00-299-6918
NSN 5990-01-591-8797
NSN 6220-01-192-5423
NSN 5930-00-134-0404
NSN 5965-01-162-8689
NSN 6685-00-822-6923
NSN 6150-00-005-1791
NSN 5998-00-816-6014
NSN 6110-00-812-0226
NSN 5945-01-261-6750
NSN 4140-01-549-6521