No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-01-137-2329
NSN 5925-01-657-7860
NSN 6105-01-386-1529
NSN 5855-00-198-3197
NSN 5920-01-387-3877
NSN 5910-01-569-1172
NSN 5945-01-600-0600
NSN 6610-01-096-0894
NSN 6610-00-292-9895
NSN 5925-01-169-8205
NSN 6130-01-032-3966
NSN 5895-01-562-4847