Shaft oscillatory control for the control assumbly, electric roof turret p-23
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5920-01-259-4258
NSN 6105-00-078-3282
NSN 6145-01-447-6265
NSN 6145-00-394-4511
NSN 5965-01-582-7436
NSN 5945-01-044-7385
NSN 6320-01-192-0332
NSN 5925-00-627-2011
NSN 5998-01-511-0109
NSN 5895-01-425-2297
NSN 5996-00-481-3930
NSN 5945-00-884-2580