No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 7035-01-013-0934
NSN 5895-01-383-6999
NSN 5945-01-012-2992
NSN 6320-00-731-6134
NSN 6130-01-549-8031
NSN 6130-01-441-8391
NSN 6145-01-076-5071
NSN 6240-00-221-0859
NSN 5945-00-991-0578
NSN 5998-01-005-0310
NSN 6685-01-442-7901
NSN 5930-00-802-3220