A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-073-5497
NSN 2925-01-159-0506
NSN 6105-00-064-9846
NSN 5915-01-388-1341
NSN 5998-00-461-2743
NSN 5905-00-820-9570
NSN 2925-00-233-5644
NSN 5998-00-619-8577
NSN 6240-01-444-3508
NSN 6145-01-377-5130
NSN 5945-00-008-4763
NSN 5996-00-865-9096