No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-01-457-0157
NSN 5920-01-351-5536
NSN 6145-01-579-3070
NSN 6610-01-447-5598
NSN 6220-01-408-6890
NSN 5985-00-315-1483
NSN 7035-01-575-8510
NSN 6645-01-101-9587
NSN 6620-01-461-3550
NSN 7035-00-392-5417
NSN 5930-01-537-6421
NSN 6620-00-479-9425