M16 metric size; z/p clear (trivalent); 50 to a box
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6150-00-539-8082
NSN 6650-01-330-6740
NSN 5975-00-557-4648
NSN 5985-00-954-1198
NSN 6220-01-630-5354
NSN 2925-01-570-2562
NSN 6145-01-555-7738
NSN 6145-01-080-7299
NSN 6135-00-175-7132
NSN 6145-00-690-9320
NSN 2925-01-519-3221
NSN 6620-01-483-1138