Center slot along lg 0.156 in. W, 0.150 in. Dp
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 5905-01-153-2512
NSN 7035-00-140-3070
NSN 5930-01-578-5726
NSN 5925-01-384-6147
NSN 6240-01-532-9358
NSN 6620-01-371-1655
NSN 5925-01-041-9943
NSN 6220-01-341-7850
NSN 5910-01-182-8853
NSN 6130-01-283-5764
NSN 5930-00-810-2989
NSN 5915-01-534-3397