No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5855-00-106-1640
NSN 5925-01-415-0261
NSN 5965-01-252-8701
NSN 5985-01-495-0883
NSN 6220-00-050-8485
NSN 5996-00-368-6745
NSN 6650-01-389-9212
NSN 5920-01-378-2490
NSN 2925-00-411-6324
NSN 6135-01-265-1384
NSN 6145-01-058-0899
NSN 2925-00-221-4977