1st end 2nd step and 3rd step each with 1 woodruff key 0.1240 in. Min and 0.1255 in. Max w, 0.1355 in. Min and 0.1405 in. Max dp
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6645-00-382-8994
NSN 6130-01-076-3524
NSN 5996-00-073-6999
NSN 5905-01-219-1735
NSN 5960-00-802-6224
NSN 6105-01-406-4844
NSN 6150-01-246-6506
NSN 5895-01-027-1754
NSN 5920-01-463-3156
NSN 6110-00-409-1115
NSN 6135-01-202-8113
NSN 6320-01-556-2011