No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-01-448-2880
NSN 6150-01-263-6269
NSN 5910-01-333-8837
NSN 5905-00-829-9902
NSN 6145-01-434-8152
NSN 5925-01-114-4243
NSN 6110-00-109-5758
NSN 5945-00-057-2401
NSN 5925-01-432-0149
NSN 5950-01-429-9156
NSN 6130-00-972-9113
NSN 7035-01-003-9142