A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5999-00-197-8792
NSN 5975-00-284-7467
NSN 5990-00-985-1334
NSN 5895-00-722-8875
NSN 5996-00-636-4849
NSN 6645-01-073-1176
NSN 5975-00-481-3681
NSN 7035-01-580-3349
NSN 6110-00-785-3514
NSN 7035-01-026-0117
NSN 6220-00-375-0473
NSN 5855-01-562-9999