No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5920-01-133-5286
NSN 6145-01-521-1824
NSN 5925-00-973-1160
NSN 5945-01-159-4902
NSN 4140-00-528-2921
NSN 5975-01-442-0907
NSN 7035-01-455-3482
NSN 5935-01-032-2157
NSN 6145-01-524-5365
NSN 5999-01-305-7679
NSN 6110-01-304-6213
NSN 5965-00-147-3070