A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5855-01-621-4191
NSN 6650-00-336-4828
NSN 2925-01-244-3016
NSN 6145-01-188-2789
NSN 5910-01-334-4067
NSN 5835-01-011-2318
NSN 5835-01-632-6627
NSN 6320-01-552-8721
NSN 6150-01-139-3787
NSN 6145-01-026-0030
NSN 5855-00-906-5386
NSN 5835-01-328-6626