No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5925-01-634-0664
NSN 6110-01-631-1858
NSN 5910-01-381-3009
NSN 6240-01-172-5981
NSN 5910-01-416-6045
NSN 6150-00-134-4833
NSN 5998-00-265-1001
NSN 5999-00-318-2877
NSN 5855-00-916-2236
NSN 6620-00-212-6921
NSN 5990-01-299-2014
NSN 2925-01-123-2235