No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-229-8821
NSN 5996-00-111-0600
NSN 6645-01-602-0000
NSN 5905-01-526-4726
NSN 2925-00-764-0167
NSN 5915-00-197-8610
NSN 6150-01-444-0238
NSN 7035-01-462-5766
NSN 5835-01-250-2939
NSN 5925-00-026-4781
NSN 5910-00-212-5969
NSN 5930-01-055-5525