No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6620-01-633-8443
NSN 5935-00-390-9637
NSN 6220-01-598-6900
NSN 6620-01-641-4122
NSN 5945-00-236-7144
NSN 6610-01-409-1781
NSN 5930-00-190-6067
NSN 5985-00-343-3632
NSN 6135-00-756-6149
NSN 6610-00-159-1110
NSN 5895-01-066-3209
NSN 5925-01-028-6504