Small diameter chamfered 0.015 in. By 45.0 degrees on outside surface
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Classification: Gaskets,washers & other seals
NSN 6150-00-400-0510
NSN 6620-01-152-4099
NSN 5985-01-466-2086
NSN 2925-00-136-2612
NSN 6610-00-811-6072
NSN 7035-00-320-5644
NSN 5935-01-170-5122
NSN 5910-00-663-5865
NSN 7035-01-258-7661
NSN 5910-00-213-8204
NSN 6685-01-370-4238
NSN 5910-00-843-4815