A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Other articles of iron or steel not wire nesoi
NSN 5930-00-230-1722
NSN 5996-00-734-5364
NSN 5855-01-423-1497
NSN 5930-01-147-4841
NSN 5990-01-170-0077
NSN 6645-01-456-6035
NSN 6110-01-429-8668
NSN 5999-01-058-5563
NSN 5920-01-287-5693
NSN 6685-01-626-2091
NSN 5945-00-206-2774
NSN 5835-01-390-4667