No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 5975-01-378-7762
NSN 5990-00-067-6791
NSN 5925-01-660-6739
NSN 5835-00-427-2772
NSN 6135-01-559-9637
NSN 5950-00-689-1933
NSN 6220-01-388-2624
NSN 4140-01-359-2643
NSN 5990-01-264-9759
NSN 5855-01-658-4510
NSN 5905-01-071-5805
NSN 6620-00-067-4946