No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Cotters, cotter-pins, washers and similar articles, of aluminum
NSN 6130-00-802-4023
NSN 6610-00-603-6515
NSN 6135-00-826-4798
NSN 6685-01-493-6122
NSN 6685-01-428-7618
NSN 6240-00-255-6976
NSN 6130-01-375-3988
NSN 5965-01-441-8826
NSN 6145-01-181-6198
NSN 6220-00-854-2532
NSN 6145-00-046-4568
NSN 5930-00-903-1057