No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6650-01-294-5243
NSN 5925-01-184-0633
NSN 6240-01-426-5581
NSN 7035-00-205-1932
NSN 6105-00-580-1435
NSN 5835-01-297-1909
NSN 6135-00-110-1981
NSN 6150-01-407-3338
NSN 5996-01-630-6436
NSN 5965-00-246-5612
NSN 5975-00-928-7404
NSN 7035-01-659-5796