No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5925-01-487-1957
NSN 5930-00-224-7656
NSN 7035-01-094-2365
NSN 6685-01-423-2532
NSN 5920-01-085-0825
NSN 5905-00-216-6576
NSN 6685-01-155-3061
NSN 5945-01-423-9086
NSN 5935-01-474-5497
NSN 4140-01-177-1445
NSN 5855-00-494-9581
NSN 5905-01-346-4222