C1006-c1015 w/hardness of rockwell b49
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 5855-01-510-8235
NSN 5945-01-198-6231
NSN 5960-00-472-5000
NSN 5998-01-215-6397
NSN 5935-00-964-9375
NSN 5999-01-542-1837
NSN 5935-00-362-3873
NSN 5998-01-239-6005
NSN 6610-00-038-8148
NSN 5985-01-429-5716
NSN 6105-00-259-1692
NSN 4140-01-383-0796