No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6145-00-220-9933
NSN 5990-01-246-2488
NSN 6645-00-547-4388
NSN 5835-01-226-0714
NSN 6220-00-251-5600
NSN 6645-01-335-3299
NSN 2925-01-101-4655
NSN 6145-00-756-0471
NSN 6145-00-115-6355
NSN 5895-01-249-0785
NSN 6650-01-005-0714
NSN 5950-00-300-2394