No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5965-01-238-0488
NSN 5960-01-359-6630
NSN 5975-01-161-1409
NSN 5925-01-114-8254
NSN 5950-01-481-8053
NSN 5935-00-573-9473
NSN 5960-01-649-1341
NSN 6650-00-445-6990
NSN 5920-01-625-1857
NSN 6620-00-464-6105
NSN 5990-00-063-9160
NSN 6105-01-426-7906