A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6110-01-659-5628
NSN 6320-00-731-6134
NSN 5930-00-500-0215
NSN 4140-00-438-2485
NSN 5855-00-763-2155
NSN 6145-01-567-8789
NSN 5950-01-065-9791
NSN 5920-01-470-0451
NSN 6105-01-101-5357
NSN 5910-01-411-6189
NSN 7035-01-102-2386
NSN 6620-00-536-5028