No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5905-00-227-0117
NSN 5910-01-469-2463
NSN 6685-00-167-3801
NSN 5930-01-003-3172
NSN 4140-01-114-2213
NSN 6110-01-212-2859
NSN 5945-00-208-4123
NSN 5985-01-510-9962
NSN 5945-01-320-6240
NSN 5999-01-580-9791
NSN 6130-00-340-3559
NSN 7035-01-073-0394