No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6130-01-466-1444
NSN 6610-01-212-8854
NSN 5910-00-547-9900
NSN 6220-01-167-1805
NSN 5910-01-358-0161
NSN 7035-01-359-7460
NSN 5990-00-432-0649
NSN 5975-00-085-4527
NSN 5945-01-505-0434
NSN 5930-01-079-4471
NSN 5935-01-572-0970
NSN 6220-01-421-5912