Chamfer holes both sides .01x45 deg.
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 6240-00-469-2339
NSN 6220-01-117-7619
NSN 5985-01-339-9743
NSN 5965-01-063-7894
NSN 6145-00-253-9445
NSN 6240-01-139-1066
NSN 5895-01-575-4894
NSN 5999-01-274-5257
NSN 5985-00-942-9502
NSN 5965-01-258-5662
NSN 5910-01-242-9293
NSN 6135-01-387-0754