For use on irrigator, surgical; mdl. 203-150 orthotec
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5965-01-287-7235
NSN 5996-01-495-4331
NSN 4140-01-468-5962
NSN 5996-00-766-0814
NSN 6110-01-422-3783
NSN 5999-01-115-6403
NSN 5935-00-201-4654
NSN 6620-00-593-5313
NSN 5996-01-613-1207
NSN 6135-00-838-7008
NSN 6320-01-578-6006
NSN 6150-00-412-8067