Two dimples on center line spaced 2.420 to 2.440 inch center to center, 0.050 to 0.070 inch high
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-069-6341
NSN 5965-01-461-4480
NSN 6145-00-625-0714
NSN 5935-01-218-0839
NSN 5950-01-516-6502
NSN 5975-00-272-2913
NSN 5950-01-128-6169
NSN 5998-01-501-3096
NSN 5935-00-764-8258
NSN 5996-00-375-5057
NSN 5945-01-642-6805
NSN 6685-00-969-3146