No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-01-459-7882
NSN 5835-01-240-5022
NSN 6645-00-179-8676
NSN 6105-00-753-7458
NSN 6685-00-583-1709
NSN 6105-01-045-6475
NSN 6620-00-303-9947
NSN 5835-01-319-4636
NSN 2925-01-077-6867
NSN 6130-00-551-8316
NSN 6685-01-383-6507
NSN 6130-01-466-5248