No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-138-4747
NSN 5990-00-518-0684
NSN 5965-00-161-4578
NSN 6650-01-443-1476
NSN 6150-01-621-9533
NSN 5965-01-004-9404
NSN 7035-01-441-9509
NSN 5996-01-328-3254
NSN 5925-00-153-4518
NSN 7035-01-167-2241
NSN 6105-01-501-5402
NSN 5930-00-448-9267